Heavy-gauge rigid PVC for concealed wiring. Cast into walls and slabs and forgotten. FR, spring-bendable, carbon-free ivory.
Strong enough for a slab pour. Spring bend-able. Carbon-free, ivory — the sign of a virgin compound.
Rigid enough to survive concrete. Bends on site without a heat-gun and springs back true.
Available only in ivory — because we add no carbon. The shade proves a virgin UPVC compound.
Flame-retardant. Certified to IS 9537 Part III for heavy stress.
20 mm to 63 mm in Light, Medium and Heavy. The right size for every job.
Specified into high-rise and large commercial work that has to last.
Couplers, bends, junction boxes and tees — matched to every diameter. See Modi's Fit.
Seven diameters — 19 mm to 63 mm — in Light, Medium and Heavy gauge, in 3-metre lengths. Each embossed with size, standard and ISI licence.
| Size | Grade | Pcs / Bundle |
|---|---|---|
| 20 mm | Light · Medium · Heavy | 100 |
| 25 mm | Light · Medium · Heavy | 75 or 50 |
| 32 mm | Light · Medium | 50 |
| 32 mm | Heavy | 25 |
| 40 mm | Light · Medium · Heavy | 25 |
| 50 mm | Light · Medium · Heavy | 20 |
| 63 mm | Light | 10 |
| 19 mm* | Light · Medium · Heavy | 100 |
Each length is 3 metres. *19 mm is a special (non-ISI) size; 25 mm is also offered in a special size.
19 mm and 25 mm offered in special (non-ISI) sizes. Confirmed rates in the 2026 Price List.
Every fitting made for Conduit Pipes, by product code and size: tees, couplers, bends, saddles, junction boxes and plates.
Branches a spur off a conduit run.
Joins two lengths of conduit end to end.
A tight 90° turn where a bend won't fit.
A short sweep for turning inside a slab or chase.
A long sweep where cable pull matters.
Clips conduit to the surface at fixed centres.
Standard depth, brass insert and screws. One entry.
Two entries with insert and screws.
Three and four entries for branching runs.
Extra depth for crowded terminations. One entry.
Straight through, deep body with insert.
Three entries in a deep body.
Four entries in a deep body.
Push-fit spigot; no solvent, no screw at the entry.
Two and three push-fit entries.
Four push-fit entries — a full crossing.
Deep body, push-fit entry. Room for terminations.
Straight through, deep body.
Three push-fit entries in a deep body.
Four push-fit entries in a deep body.
Reinforced plate for a ceiling fan hook box.
Closes a round box flush to the ceiling or wall.
The mid size, for larger round boxes.
The largest round cover in the range.
Product codes as per the price list dated 01-08-2026. Packing and rates are in the 2026 Price List. All fittings also listed under Modi's Fit.
Once it's in the slab, you don't change again. Every length is extruded from virgin PVC compound, self-extinguishing, embossed with size, standard and ISI licence. The cheaper way exists. We don't make it.
Enquire about Conduit